PHOTOSHOP LAB REPORT :: essays research papers

1.) accusing of the labThe objective of this lab was to make a halftone detrimental of a small clipart. 2.) Facilities, supplies and equipment usedWe did this in the photo lab and in the dark manner. To complete this lab we needed to have a running(a) knowledge of the camera, developer, fix and a loop.3.) Techniques employedTo make lease of a clipart several steps must be taken. First is to turn the copy board to be parallel to the floor. Then the glass front must be unlocked and lifted. The art is so placed in the marrow squash of the board next to a gray scale. After shutting and fasten the glass front the copy board is then turned to be upright facing the shutter of the camera. The aperture should be set at an F-stop of 22 at %100. The next step takes place in the dark room on the other side of the process camera. You must position the honest plate to be locked in front of the shutter. You then press the sort button or switch to check the alignment of the art on the c opy board. When aligned you open the transparent plate and use the vacuum cleaner to hold the film in position on the solid plate. You then close the solid plate and press the button that controls the timer for the shutter. This exposes the film to the light from the clipart and the gray scale. When the shutter closes you remove the film by turn of events off the vacuum. Then place the film in the developer until you can identify the level 4 on the gray scale. This is the desired development of the film. When on that point you place the film in the stop solution. After a s or so in there you place the film in the fix. This removes all the remaining silver from the film.